Stay-Flat Plywood Spacers
Plywood or other sheet stock can warp, especially if it’s stored surface to surface. The blocks separate the sheets so air can circulate on both sides. Flat sheets from the lumberyard stay flat this way, no matter how long they’re stored,
The leather is flexible, so you can use them on any combination of thicknesses of sheet goods.
The blocks are a snap to make from scrap wood and leather. Cut two 1-in.-wide strips of leather (or vinyl or heavy cloth) and space and screw 2-in. x 3/4-in. x 1-in. blocks along the strap.
The air space also keeps them a lot easier to grab when you need to pull one out. For full sheets, use three sets of spacers, one at each end and one in the middle.
Find-Anything Hardware Drawer
Nothing has a chance to randomly accumulate in the shop—not in apron pockets, on cabinet shelves, not even in a drawer. There is truly a place for everything, everything goes in its place, and no usable area remains empty. One of his hardware drawers is a sublime example.
In this drawer, movable partitions are held in place by strips of foam weather stripping at the front and back. The 44-plus boxes rest on edge, labels up, for easy grabbing and stowing.
Think of never having to wonder where to find a 1-in. drywall screw or a 3/8-in. washer!
Shop for boxes at craft, tackle, office or dollar stores (See why it isn’t safe to buy dishes from the thrift store). But if you want lots of just about any particular size box, check out . This is for super-organized shop rats, though. The minimum order is $100! But you get tons of high-quality boxes for the money.
Just cut some 2-in.-wide plywood scraps and screwed them together to form T-blocks and store the plywood over them. If snow, slush or rain sneaks in on the car tires and gets the floor wet, the wood is safe. See how to keep a damp space like a basement dry.