How to Clean Windows
Wash your windows the fastest way with crystal clear, streak-free results. Try washing windows with a squeegee and you’ll never go back to a spray bottle and paper towels. Squeegees get your glass clear and streak free in a fraction of the time it takes with paper towels. Check out the basic equipment you need and the simple steps to follow for fast, clear results when cleaning windows.
Basic equipment is all you need
Keep your squeegee fitted with a sharp, new rubber blade. Purchase two or three to have on hand. The pros we talked to change their squeegee blades as often as once a day. That’s because you just can’t do a good job if the edge of the blade becomes nicked, sliced or rounded over with use. If your squeegee leaves streaks or just isn’t performing like new, don’t hesitate to replace the blade. You can get a little more mileage out of blades that aren’t nicked or sliced by simply reversing them to expose a fresh edge. When you store the squeegee, make sure nothing touches the blade.
Our squeegee method is easy to master
Step one for cleaning windows: Dip the scrubber in the bucket and squeeze excess water from the scrubber.
Will you need to use a ladder when you wash your windows? If so, consider using a ladder stabilizer.
Scrub the glass
Scrub the glass, working at all angles to clean the edges. Make sure to cover every square inch of the glass. This technique allows you to get great results immediately. We’re moving the squeegee horizontally across the glass, but vertical strokes will work too. If you work vertically, angle the squeegee to direct excess water toward the uncleaned area.
Clean a starting strip
Squeegee across the top
Work down the window
Wipe off excess water
You can use a squeegee inside the house, too!
For divided-lite windows, use a sponge and a small squeegee. If you can’t find a small enough squeegee, you can cut off a larger one to fit your glass size for a DIY window cleaner. Scrub the glass with a wrung out sponge. Then use the tip of the squeegee to clear a narrow strip at the top. Pull the squeegee down and wipe the perimeter.
Changing a squeegee blade, Step 1
Changing a squeegee blade, Step 2
Tips for hard-to-clean windows
- Remove tree pitch or bug droppings with a fine (white) nylon scrub pad. Wet the glass first and rub in an inconspicuous area to make sure you’re not scratching the glass.
- Clean tough glass stains and built-up mineral deposits from shower doors and other glass surfaces using mild household abrasives and an ordinary power drill. Here’s how.
- Add 1/2 cup of ammonia per gallon of water to help remove greasy dirt for a DIY window cleaner
- Loosen sticky residue left from labels or tape by soaking it with a specialty product like Goof Off. You’ll find Goof Off in the paint department at hardware stores and home centers. Then scrape off the residue with a razor blade.
Recap: 10 easy steps to clean windows. Step 1
Once you master the simple technique, you can get your windows sparkling clean in 30 seconds! Click to follow this 10 photo series.
Scrub the glass, covering every square inch.