Tape Off the Carpet
When painting baseboard, some painters slip masking tape under the baseboard. But this is time-consuming and doesn’t create a seep-proof seal between the baseboard and the carpet. Instead, press the tape against the baseboard, covering about 1/4 in. of the bottom edge. Press down hard on the carpet while you apply the tape. That way, the tape will hold the carpet down while you paint. Later, when you remove the tape, the carpet will rise and cover the unpainted edge of the baseboard.
Use a high-quality tape for this job because it grabs and holds the baseboard better. Add a strip of cheap tape to create a wider shield over the carpet. Finally, spread a drop cloth over the tape. This technique won’t work if your carpet has a very low pile or if you have no padding under the carpet.
Narrow Drop Cloths are Better
Large drop cloths work great if you’re painting a ceiling, but they’re overkill if you’re only painting walls and trim. Drop cloth runners are usually 3 to 4 ft. wide and are much easier and safer to work with because you don’t have to fold them several times. Folded drop cloths are easy to trip on, and nothing good results from tripping with an open paint can in your hand.
Need help with your home improvement projects?
We’ve helped millions of people create the home of their dreams. Join DIY University and get unlimited access to our courses, easy-to-follow instructions, and expert help when you need it.