Building the base
Laundry Pedestal plan
Fasten the frame together with 3-in. screws. Attach a joist in the middle. Apply construction adhesive to eliminate squeaks, then fasten 1/2-in. plywood over the top with 1-5/8-in. screws.
The key to the laundry pedestal project is to make the pedestal sturdy, especially for front-loading washers, since they have a tendency to move around if they’re not on a solid, level surface.
To start, measure the length and width of your washer and dryer. That’s your minimum size for the pedestals. You can make them longer and wider if you want the extra space to stand on to reach overhead shelving or to set the laundry baskets on. Or you can make one long pedestal to fit under both the washer and the dryer (see illustration).
Build the pedestal out of 2×10 or 2×12 lumber. Feel free to add an attractive finish. Use shims to level the pedestal before you set the appliance on it. Try out these 20 small space laundry room organization tips, too.
Required Tools for this Laundry Pedestal Project
Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.
- Circular saw
- Cordless drill
- Countersink drill bit
- Framing square
- Safety glasses
Required Materials for this Laundry Pedestal Project
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here’s a list.
- 1-5/8-in. screws
- 1/2-in. plywood
- 2 x 10 or 2 x 12
- 3-in. screws
- Construction adhesive