Plug the planter hole, then add rocks for indoor water fountains
Photo 1: Waterfall base
To start building your indoor water fountains, place the pump in the bottom of the container with the tubing attached and the switch on. Fill around and above it with bricks or stones.Photo: Courtesy of We do everything by our own hands
Photo 2: Build falls and pond
Create a ledge with a flat stone for a mini waterfall. Adjust the flow with the valve and orient the water line until you achieve a pleasing result. Hide the line with more stones.Photo: Courtesy of We do everything by our own hands
Create this natural indoor water fountain using a planter, rocks and a small pond pump.
Plug the drain hole of a large glazed ceramic or resin planter with plumber’s epoxy putty. After it cures, fill the planter with water for a day or two to confirm that it won’t leak. Place the planter exactly where you want it before adding the rocks and water. It’ll be very heavy once it’s done.
Stack bricks or stones around and above a small pond pump (about 40 gph) to about two-thirds the depth of the vessel. Then cut the water line to length and add a restrictor valve. We used a 3/8-in. PEX valve (clamp it if the hose comes loose under pressure). Or choose a “pinch”-type valve, found with pond accessories at home centers. You can change the look and sound of the indoor water fountains by tinkering with the water flow rate and the shape, size and arrangement of your stones. That’s the fun part!
Required Tools for this Project
Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.
- 4-in-1 screwdriver
- Utility knife
Required Materials for this Project
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here’s a list.
- 40 gph submersible pump
- Flexible water line (to fit pump)
- Planter with base
- Plumber's epoxy putty
- Restrictor valve