Install a stainless steel backsplash
Photo 1: Apply construction adhesive
Smooth the construction adhesive across the entire panel with a wide putty knife. Spread it evenly so you don’t leave bumps that will show through the thin metal.
Photo 2: Support the panel with a cleat
Screw a cleat to the wall so the stainless steel backsplash will be supported while the adhesive cures. Carefully position the stainless steel backsplash and press it firmly into place.
A stainless backsplash is a striking complement to stainless appliances. It’s also durable, easy to clean and a cinch to install.
The edges will be sharp, so wear gloves and protect the surfaces in your kitchen. On the back side of the panel, use a caulk gun to apply a bead of heavy-duty construction adhesive (Loctite PL 400 is an example) across the entire panel surface. Use a wide putty knife to spread the adhesive evenly (Photo 1).
A cleat beneath the panel will support the stainless steal backsplash as the adhesive cures (Photo 2). Position the panel carefully and then press it firmly against the wall. Starting at one end, use a clean, soft rag to smooth the stainless steal backsplash into place and remove any air bubbles. When you’re finished, remove the protective plastic coating.
Buying sheet metal
You can order a stainless steel sheet online (one source is ) or from a local metal shop (about $50). You’ll need to know the size, gauge and finish. A thickness of 20 or 22 gauge is best for this project. Handle it carefully to prevent denting it. To match your appliances, order a “304-#4” brushed (sometimes called satin or architectural) finish and ask to have the edges smoothed or deburred so the panel doesn’t arrive razor sharp. Most shops will do this for free or for a nominal cost. The panel will arrive with a protective plastic coating. Don’t remove this until you’ve installed the panel on the wall.
“Stainless steel isn’t cheap, but we wanted something to match the range and to protect the wall from heat and grease. Ordering and installing it ourselves kept the price low, and it really looks sharp.”
Steel Accessories Top It All Off
The Johnsons used IKEA’s Grundtal stainless steel rails and accessories to add affordable and stylish off-the-counter storage to their new kitchen. The screw-in rails match the existing appliances and are available in three lengths. The Grundtal line also includes the spice rack shown and much more. Visit .
Required Tools for this Project
Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.
- Caulk gun
- Drill/driver - cordless
- Putty knife
Required Materials for this Project
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here’s a list.
- Construction adhesive
- Stainless steel sheet