Replace a rail
Photo 1: Dig alongside the post
Dig to the bottom of one side of the post that holds the rotted rail.Photo: Courtesy of We do everything by our own hands
Photo 2: Remove the old rail
Lift the post out of the ground and remove the old rail.Photo: Courtesy of We do everything by our own hands
Photo 3: Slip in the new rail
With the new rail in place, set the post back into the hole and tamp the dirt back in around it.Photo: Courtesy of We do everything by our own hands
Split rail fences are sturdy and long lasting, but occasionally pieces need to be replaced because they’re broken or rotted. Rails and posts are available in stock or can be ordered at lumberyards and home centers.
To remove a rail, first mark the bottom of one of the posts with masking tape so you can return it to the proper depth. Dig out the post (Photo 1).
Pull out the damaged rail (Photo 2), then set the new piece into the slots and lower the post back into the hole (Photo 3). Hold the post at the right height and line it up with the other posts as you pack the soil down.
Required Tools for this Project
Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.
- Posthole digger
Required Materials for this Project
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here’s a list.
- 2x4 for tamping
- New rails