Add wiring to boost performance
Photo 1: Connect patch cords at the router
Snap the patch cord into an unused port on the back of your wireless router and connect it to the "home run" jack you just installed.Photo: Courtesy of We do everything by our own hands
Photo 2: Finish the installation at your TV
Run a patch cord from the new jack to your streaming device. Then reprogram the unit to turn off the wireless mode and find the hardwired connection.Photo: Courtesy of We do everything by our own hands
Guess what? Wireless networks don’t always live up to their promise of reliable high-speed service. Wireless performance depends on the distance between the router and your computer or streaming devices, and your home’s construction. If your streaming device isn’t getting a strong signal, you can experience a complete loss of signal (dropouts) or excessive “buffering” (the video stops while it downloads more data).
To fix the problem, run hardwired “home-run” cabling from your streaming devices to the wireless router. Yes, that’ll mean drilling holes and fishing network cables through your walls. And you’ll have to install network jacks at each end of the runs. But when you’re done, you’ll have fast, reliable service.
Most wireless routers already have four jacks located in the back of the unit. So you’ll just need cable, RJ-45 jacks and patch cords. Get step-by-step instructions on installing communication wiring. Then run patch cords between the jack and your devices (Photos 1 and 2).
Required Tools for this Project
Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.
- 4-in-1 screwdriver
- Drill bit set
- Drill/driver - cordless
- Drywall saw
Required Materials for this Project
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here’s a list.
- Patch cords
- RJ-45 cable
- RJ-45 jacks