Simple fix for a flickering light
Bend the tab
With the power off, bend the tab in the bottom of the socket slightly upward with a screwdriver.
Do you have bulbs that burn out quickly, lights that flicker, or a light fixture that simply doesn't work even though there's power to it? Try this 60-second fix before you call an electrician.
Turn off the power to the fixture and use a non- voltage tester to make sure the power is off. Then reach into the bulb socket with a flat-blade screwdriver and gently pry up on the tab that's centered at the bottom to restore good with the bulb.
Required Tools for this Project
Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.
- Flat tip screwdriver
- Non- voltage tester