Photo 1: Fill with setting-type compound
Bevel the edge of the drywall with a utility knife. Then fill in the gap with fast-setting joint compound.Photo: Courtesy of We do everything by our own hands
Photo 2: Mud and tape
Spread the fast-setting compound into the gap and surrounding area and embed the tape right up to the edge of the electrical box. Let it set up and apply the final two coats of lightweight compound. Sand with a medium-grit sanding sponge.Photo: Courtesy of We do everything by our own hands
We’ve all done it—cut the electrical box opening too large. Sure, you can cover it with a “jumbo” electrical plate, but that can look pretty stupid, especially if there are other boxes nearby. Instead of squishing joint compound into the gap (it’ll always crack), try this fix.
First prepare the gap and fill it with compound (Photo 1). Then apply joint tape and additional mud coats (Photo 2).
Required Tools for this Project
Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.
- Dust mask
- Taping knife
- Utility knife
Required Materials for this Project
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here’s a list.
- Lightweight joint compound
- Medium grit sanding sponge
- Paper joint tape
- Setting-type joint compound