An alternative to spring hinges
Installation and adjustment
Rotate the “sweep” adjuster to slow the closing speed to about five seconds (it will prevent the door from bumping you in the rear as you exit). Then turn the “latch” adjuster to get a quick, one-second final swing to latch the door.
Spring hinges are a little cheaper, but can be a pain to install and adjust.
Replacement spring hinges are expensive. But for just a little more money, you can buy a high-quality hydraulic door closer (shown here is Global No. TC2204; available through our affiliation with amazon.com). You can find less expensive door closers, but they don’t last as long and are less adjustable.
If you have a steel door, don’t use the wood screws that come with the unit (they’ll pull out after a week). Instead, drill the mounting holes (make sure the drill is level) all the way through the door and mount the unit with hex bolts, nuts and lock washers. Then fine-tune the door’s operation as shown.
Required Tools for this Project
Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.
- 4-in-1 screwdriver
- Adjustable wrench
- Cordless drill
- Drill bit set
Required Materials for this Project
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here’s a list.
- Hex bolts, nuts and lock washers
- Hydraulic door closer