Stiffen wobbly deck railings
Add 2x blocking
Toe-screw blocking to the rim of the deck with three 3-in. deck screws at both ends.
Deck posts and railings screwed to a single rim joist feel wobbly because the rim joist flexes whenever you lean against the railing. Adding blocking will stiffen the rim joist and make the railing feel much more solid.
First, tighten any loose bolts and screws. If the post doesn’t have bolts, add them—carriage bolts work best.
Cut pressure-treated 2-by blocking (the same width as the floor joists) to fit tightly between the rim joist and the next joist. Place the blocking directly behind the post and toe-screw it into both the rim joist and the neighboring joist. Fasten additional blocking every 4 ft. along the rim joist.
Required Tools for this Project
Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.
- Adjustable wrench
- Circular saw
- Drill/driver - cordless
Required Materials for this Project
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here’s a list.
- 2x blocking
- 3-in. deck screws