Build and secure the shelves
Photo 1: Secure blocking to the existing shelf
Buy your baskets, then cut spacer blocks 1/2 in. wider than the baskets are tall. Cut the ends of the blocks at an angle to accommodate the wider top shelf. Screw blocks to the bottom shelf, spacing them 1/2 in. farther apart than the baskets are wide. Then install and secure the top shelf.Photo: Courtesy of We do everything by our own hands
I tossed my hat onto the closet shelf the other day and discovered a whole lot of unused real estate up there. Made me think, if one shelf is good, two would be better. And the upper shelf could be 15 in. deep instead of 12 in. because there’s no closet rod hanging out below. The deep baskets help with the organization; cabinet knobs make for easier access. We show a two-tier shelf; you can install three if your closets (and you) are tall enough.
Figure A: Closet Shelf
This diagram shows how the individual pieces of the twin closet shelves fit together.
Required Tools for this Project
Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.
- Circular saw
- Cordless drill
Required Materials for this Project
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here’s a list.
- 1-5/8 inch screws
- Closet rod