First spread a plastic tarp on the floor under the chandelier to catch the drips. Then turn off the light and spray the solution on the chandelier until liquid beads start to run (you'll use a lot of spray, but it beats wiping). The spray rinses off the dust. The solution that's left evaporates quickly and doesn't leave water spots. The spray works well on hanging crystals, but don't expect it to remove dust from crevices. Buy it from or . If you're tired of cleaning you chandelier and would like to replace it, here's how you can do it yourself.
Cut Grease With a Hot Rag
Grease and dirt build up on kitchen cabinets over time. To clean your cabinets, first heat a slightly damp sponge or cloth in the microwave for 20 to 30 seconds until it's hot. Put on a pair of rubber gloves, spray the cabinets with an all-purpose cleaner containing orange oil, then wipe off the cleaner with the hot sponge. For stubborn spots, let the cleaner sit for five minutes first. Wipe in the direction of the wood grain. Rinse and reheat the sponge as it becomes saturated. Then wipe the cabinets with a cool, damp cloth. The orange oil leaves a shiny coating. This works for any wood or metal surface.
Clean Hard Floors Faster
Polish With a Microfiber Cloth
Microfiber cloths excel at putting the finishing touches on mirrors, countertops and even tile and fixtures. After cleaning surfaces with your favorite cleaning solution and drying them off with a terry cloth rag or a separate microfiber cloth, polish them to a mirror finish with a dry microfiber cloth.
Microfiber cloths are perfect for this because they pick up dust, wipe off smudges and don't shed any fibers. You'll find microfiber cloths wherever cleaning supplies are sold. You can even buy them in bulk at wholesale clubs and use them throughout your house for all kinds of other cleaning chores.
Blow Out the Garage
Forget the broom—clean out the garage with a leaf blower. It's fast (about five minutes), you don't have to move heavy stuff, and you can clean work surfaces and shelves along with the floor. First put away papers or anything else that you don't want blown away. Open the overhead door. Put on a dust mask, earplugs and safety glasses, then turn on the leaf blower and blow out the dust and debris. Use the leaf blower to get under workbenches and to clean off the benches themselves. If you don't own a leaf blower, you may be able to use your shop vacuum by connecting the hose to the exhaust port. This cleaning method works great for screen porches, too. No leaf blower? Our buyer's guide can help you decide which one is best for you.
The Right Stuff for Rust
For toilets, add Super Iron Out to the water in the bowl, then clean with a stiff nylon-bristled brush. For sinks and tubs, first wet the surface with water. Apply Super Iron Out to a damp sponge (wear rubber gloves and a mask—this stuff is powerful!). Wipe the stain with the sponge until it's gone. Rinse the surface with plain water to completely remove the Super Iron Out.
Remove Pet Hair with Duct Tape
Wrap duct tape around a paint roller cover, sticky side out. Roll the paint cover over furniture or carpet to pick up the pet hair. Add more tape as the surface gets full of hair.
Remove Bathroom Soap Scum
To prevent soap scum buildup, stop using real soap and start using a synthetic. Chemically speaking, any soap in a liquid or gel form, and some bar soaps (Zest and Ivory), are actually synthetic soaps and much less likely to leave a tough film in your sink, shower or tub.
Scum-Proof Your Shower Doors
To prevent soap scum buildup, stop using real soap and start using a synthetic. Chemically speaking, any soap in liquid or gel form is actually synthetic soap and much less likely to leave a tough film in your sink, shower or tub.
Spot-Clean Food and Drink Spills
Just press the tip into the stain to release the solution, then rub the tip across the stain to remove it. Inexpensive and portable, they're great at removing food and drink spills.
Before applying a cleaning solution to an entire surface or fixture, first test it on a tiny area to make sure it won't damage or discolor the finish.