Constructing a mini-sawhorse
For years, Ken, my boss here at We do everything by our own hands, and I have been debating the merits of collapsible metal sawhorses vs. clunky, heavy, hard-to-store homemade wooden ones. (Guess which side I’m on?) He finally came up with a design that actually makes some sense to me. They’re short, compact, stackable mini horses that you can throw together from scraps in about 30 minutes. Short is the key. Ken uses his to work on projects that are too tall for the workbench but too short for the floor, such as cabinets that need finishing. They can also be used as mini scaffolding for working overhead. OK for now, Ken, but if mini collapsibles hit the market, all bets are off. Your horses will be belly up.
Figure A: Cloning Saw Ponies
To build your own ponies, you’ll need an 8-ft. length of 1×4, 3 ft. of 2×4, a 3-ft.-long chunk of either 1-in.-thick decking or 2×6, and a few scraps of just about any plywood. Shown is 1/4-in. plywood, but you can use 1/2-in. or any other thickness you have lying around. Then:
- Cut all the boards to length, including parallel 15-degree bevels on the ends of the legs.
- Rip the 2×4 edges on the spine to 15 degrees on the table saw. Screw the top to the spine with equal overhangs at all four sides, then screw the legs to the top.
- Scribe the ends of the plywood gussets and staple, nail or screw and glue them to the legs.
- Saddle up and ride into the sunset.
Video: How to Build Sawhorses
Required Tools for this Project
Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.
- Circular saw
- Cordless drill
- Miter saw
- Safety glasses
- Table saw
Required Materials for this Project
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here’s a list.
- 1-5/8-in. screws
- 1x4 x 8'
- 2-1/2-in. screws
- 2x4 x 3'
- 5/4 x 6 x 3' (or 2 x 6 x 3')
- Plywood scraps