Shower valve replacement…without ruining the tile
Photo 1: Remove the old shower valve
Unscrew the old handles. Mark the cover hole on the tile and cut it out with an abrasive blade in a jigsaw.
Photo 2: Install the new valve
Cut the pipes and remove the old valve. Solder in a new one and screw the conversion plate over the hole.
If your old two-handled shower valve is worn out or leaks, don’t despair. You don’t have to tear open the tile wall to replace it. The best way to replace it is with a conversion plate. The plate covers the old valve holes and you do the entire job through the hole you cut in the tile. Buy a plate that fits your new faucet and is wide enough to cover the old valve positions. To find a conversion plate, call a plumbing supply store or order online.
Shower valve replacement is a challenging project. You may find loose tiles, rusted pipe and other problems.
Required Tools for this Project
Have the necessary tools for this DIY shower valve replacement project lined up before you start—you’ll save time and frustration.
- 4-in-1 screwdriver
- Slip joint pliers
- Soldering torch
Required Materials for this Project
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here’s a list.
- Conversions plate
- New shower valve
- Pipe fittings